Stone Age Flint Scraper Group

Comprising mostly bifacial and uniface leaf-shaped and piriform flint and chert arrowheads; probably from the Sahara region of North Africa. 88 grams total, 17-45 mm



UK gallery, early 2000s. This lot is accompanied by an illustrated lot declaration signed by the Head of the Antiquities Department, Dr Raffaele D'Amato.

Similar specimens of arrowheads have been found in the Eastern Sahara Region of Abu Tartur Plateau. Most of the arrowheads came from the El Jarar Neolithic, c. 7700-7300 B.P. (c.6500-6100 B.C.). Other parallels occur in the region of Kharga Oasis.

Knapped implement showing some cortex to the upper edge, inked collector's note '2. SS1236 Twydall'. 76 grams, 64 mm



Found Twydall, Kent, UK, 1912-1915. Richard Jones collection, Welling, Kent, UK, 1912-1915. Ex Rochester Museum, Kent collections. Specialist collection of J Edwin Jarvis. Ex Martin Schoyen collection, London, UK. Accompanied by a copy of an article on the site at Twydall and collections list. This lot is accompanied by an illustrated lot declaration signed by the Head of the Antiquities Department, Dr Raffaele D'Amato.

These tools were part of the collection that was originally donated by a Mr Richard Jones of Welling in Kent to the Rochester Museum. During the period 1912-1915. Mr George Payne of the Kent Archaeological Society also collected along with a Mr George Baker. During 1902 'Sharpes Green Cement Works' was erected, then the smallest cement works on record, using second hand equipment and the last to use Static Chamber Kilns. The processing site was situated on the south shore of the river Medway near Gillingham, Kent, on an island known locally as "Horrid Hill" just off the shore. Horrid Hill was so named because French prisoners of the Napoleonic war who attempted to escape the 'Hulks' moored on the river were hanged here for their efforts. The raw material for the manufacture of cement was extracted from a local quarry in orchard grounds belonging to a Mr Walter Stunt of Lorrendon, Faversham, Kent at a place called Twydall between Chatham and Upchurch. During the removal of the chalk an infilled cavity was broken into on the eastern face of the quarry, which contained very rich lower Palaeolithic material. To facilitate the removal of the extracted chalk from the quarry to the works on the river a trackway was constructed to allow a small horse drawn railway to carry wagon loads of chalk for processing. To transport the loads over the tidal saltmarsh from river bank to the island a causeway was built above the upper tidal limit to the works. The material used was the gravel extracted at the quarry which was useless for the manufacture of cement and which contained the implements. The subsequent erosion caused by the tidal flow of the river exposed the Palaeolithic implements along the stretch of the causeway and, during the period of 1912 to 1915, were collected from the surface. The majority of the material is made up of flakes and cores typical of the 'Clactonian' style with also some Acheulian axes. The implements are well retouched and worked on thick, heavy flakes with high angle platforms, typical of the 'Clactonian' industry. The tools are made from the same marbled north Kent flint which was used at the Swanscombe Palaeolithic site from the ancient lower gravels of the Thames valley. This flint is typically a brown and yellow banded variety derived from the dark green skinned nodules of the "Bull Head" bed which underlies the Thanet sands.

With light cream and blue silky patina; tip re-sharpened in antiquity to prolong use; mounted on a custom-made display stand. 339 grams total including stand, stone: 13.1 cm



Found Yonne, Bourgogne Franche-Compte Region, France. From a large French collection built in the early 1900s. Acquired on the European art market. From the private collection of an East Anglian, UK, specialist collector. This lot is accompanied by an illustrated lot declaration signed by the Head of the Antiquities Department, Dr Raffaele D'Amato.